Mitsubishi FX3U-422-BD - Programming Software for Remote Maintenance

I-10
FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
1 Outline
1.4 Programming Tool Applicability
1.4.2 Programming software for remote maintenance
The table below shows programming software for the personal computer which uses remote access.
→ For the applicability of programming tools for setting the modem, refer to Subsection 1.4.1.
In the case of applicable versions
The programming software is applicable from the following versions:
1. Japanese versions
: Applicable (If applicable versions of main units are limited, they are described inside ( ).)
—: Not applicable
2. English versions
: Applicable (If applicable versions of main units are limited, they are described inside ( ).)
—: Not applicable
Model name
(Software name)
Applicability
(applicable version)
Remarks
FX3U and FX3UC PLCs
GX Developer
SWD5C(F)-GPPW-J
 (Ver. SW8 P or later)
Ver. 8.13P
Select the model "FX3U/FX3UC"
When connecting the programming software to a PLC in
which the PP modem mode (ch1) or PP modem mode (ch2)
is set, use Ver. 8.18U or later.
FX3G PLC
GX Developer
SWD5C(F)-GPPW-J
 (Ver. 8.72 A or later) Select the model "FX3G"
FX2N and FX2NC PLCs
GX Developer
SWD5C(F)-GPPW-J
 (Ver. SW2 A or later)
Select the model "FX2N/FX2NC"
FX-PCS/WIN
SW0PC-FXGP/WIN
 (Ver. 2.10 or later)
FX1S, FX1N and FX1NC PLCs
GX Developer
SWD5C(F)-GPPW-J
 (Ver. SW5 A or later)
Select the model "FX1S/FX1N/FX1NC"
FX-PCS/WIN
SW0PC-FXGP/WIN
 (Ver. 4.00 or later)
Model name
(Software name)
Applicability
(applicable version)
Remarks
FX3U and FX3UC PLCs
GX Developer
SWD5C(F)-GPPW-E
 (Ver. SW8 P or later)
Ver. 8.13P
Select the model "FX3U/FX3UC"
When connecting the programming software to a PLC in
which the PP modem mode (ch1) or PP modem mode (ch2)
is set, use Ver. 8.18U or later.
FX3G PLC
GX Developer
SWD5C(F)-GPPW-E
 (Ver. 8.72 A or later) Select the model "FX3G"
FX2N and FX2NC PLCs
GX Developer
SWD5C(F)-GPPW-E
 (Ver. SW2 A or later)
Select the model "FX2N/FX2NC"
FX-PCS/WIN-E
SW0PC-FXGP/WIN-E
 (Ver. 1.00 or later)
FX1S, FX1N and FX1NC PLCs
GX Developer
SWD5C(F)-GPPW-E
 (Ver. SW5 A or later)
Select the model "FX1S/FX1N/FX1NC"
FX-PCS/WIN-E
SW0PC-FXGP/WIN-E
 (Ver. 3.00 or later)