Mitsubishi FX3U-422-BD - Page 689

I-23
FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
5 How to Setup Modems on the PLC Side
5.1 Setting Using GX Developer
A
Common Items
B
N:N Network
C
Parallel Link
D
Computer Link
E
Inverter Communication
F
Non-Protocol Communication (RS/RS2 Instruction)
G
Non-Protocol Communication (FX
2N
-232IF)
H
Programming Communication
I
Remote Maintenance
Apx.
Discontinued models
2 Checking the serial communication (parameter) setting
Click the [PLC system(2)] tab on the dialog box.
Make sure that the "Operate communication setting" box is cleared, and click the [End] button.
If a check mark is there, clear it, and then click the [End] button.