FX-TRN-BEG-E F: Advanced Challenge 6
B-74
6.6 Lifter Control
6.6.1 Training Screen
6.6.2 Device Assignment
Category F: Advanced Challenge
Exercise F-6. Lifter Control
Objective Carry parts to three positions using the lift.
Difficulty Level 3 (
★★★
)
Score (Class) 290 (Advanced programming)
Type Device No. Device name Operation
Input
X0 Upper ON when part is detected.
X1 Middle ON when part is detected.
X2 Lower ON when part is detected.
X3 Part on lift ON when part is on the lift.
X4 Lower lift position ON when the lift is at lower position.
X5 Middle lift position ON when the lift is at middle position.
X6 Upper lift position ON when the lift is at upper position.
X10 Sensor ON when part is detected at the left end.
X11 Sensor ON when part is detected at the right end.
X12 Sensor ON when part is detected at the left end.
X13 Sensor ON when part is detected at the right end.
X14 Sensor ON when part is detected at the left end.
X15 Sensor ON when part is detected at the right end.
To Next Page
Loading...
