Mitsubishi MELSEC-F FX-TRN-BEG-E - Overwriting of a Project; Saving of a Project with a Different Name

FX-TRN-BEG-E Preparation befor Operating 2
C-6
2.2.2 Saving of a Project with a Different Name
1) Select "Project"
→
"Save as".
2) The screen shown below is displayed.
Enter the project name and the header, then click the [Save] button.
2.2.3 Overwriting of a project
1) Select "Project"
→
"Save".
2) The open project is overwritten with the contents displayed on the screen.
When "Save" is selected for the first time since the project is created, the ’Save as’ dialog box
is displayed in the same way as explained above.
Specify the place in which
the project is saved.
Enter the project name.
Enter the header.