FX-TRN-BEG-E Outline of the Lesson Plan 2
A-6
2.2 Setup of Software
Set up the software following the procedure below.
• System requirements for your computer
*1 Only users having the administrator privilege are allowed to set up the software to the
Windows XP and start it up.
*2 Mount the memory having a capacity larger than the value recommended by the used
OS.
"Microsoft", "Windows" and "Windows NT" are registered trademarks or trademarks of
Microsoft Corporation USA in the USA and other countries. Other company names and
product names are trademarks or registered trademarks of each company.
Operating Procedure
1) Start Windows and insert the CD (SW0D5C-FXTRN-BEG-E) included in the package into
the CD-ROM drive to begin system installation. It is recommended to end other application
software before beginning the installation process.
OS
Microsoft Windows 98, 98SE, Me Microsoft Windows NT4.0 (SP3 or later)
Microsoft Windows 2000 Microsoft Windows XP
*1
CPU Pentium 500 MHz or more is recommended.
Memory
64 MB or more (128 MB or more is recommended.)
*2
Hard disk 150 MB or more
CD-ROM drive 1 unit (for installation)
Display XGA (1,024
×
768) or more is mandatory.
Video
Video card compatible with Direct3D whose VRAM capacity is 4 MB or more
(8 MB or more is recommended.)
Browser Internet Explorer 4.0 or later is mandatory.
To Next Page
Loading...
