Mitsubishi MELSEC-F FX-TRN-BEG-E - Input of Comments

FX-TRN-BEG-E Operation 3
C-20
3.3.2 Input of comments
This chapter explains how to input a device comment.
1) Select "Edit"
→
"Documentation"
→
"Comment".
2) Place the cursor on the device for which a comment is to be input and double-click it.
3) When the ’Enter device comment’ dialog box is displayed, type a comment. Up to 32
characters are available.
You cannot delete a comment selecting "Undo".
POINT
You can type device comments when you are writing an instruction.
1) Select "Tools"
→
"Options".
2) When the ’Options’ dialog box is displayed, specify ’Continues during instruction write’.
Enter an instruction and comment as follows.
Double-click on the coil.
Type a comment up to 32 characters.
The device number for the comment.
If you specify it, you can type in
device comments after writing an
instruction.
2) The 'Enter device comment' dialog box is displayed next.
1) Write an instruction.