Mitsubishi MELSEC-F FX-TRN-BEG-E - Starting PLC Programming

FX-TRN-BEG-E Outline of the Lesson Plan 2
A-9
2.3 Begin to Learn PLC Programming
2.3.1 Start the Training Software
Let’s open the training software.
Select [Start]
→
[Programs]
→
[MELSOFT FX Trainer]
→
[FX-TRN-BEG-E].
Note: Do not use this software and MELSOFT GX Developer at the same time.
2.3.2 User Registration
When the software is opened the user registration window is displayed.
If registered as a user, exercises that have been successfully completed will be indicated on
the menu and points will be added to the user score.
• Fill in the name and password fields to register for the first time.
Name: Alphabetic and numeric ... 32 characters or less
Password: Numeric ... 8 characters or less
• If already registered as a user, select the user name on the pull-down menu and enter the
password.
If the password does not match, an error message will occur and the password must be
re-entered. The main menu is not accessible.
Register as a new user if the password is forgotten.
User registrations can be deleted by selecting “File”
→
“Delete user information” from the
tool menu.
If you do not wish to
register as a user, click
[Start] leaving the boxes
blank.