Mitsubishi MELSEC-F FX-TRN-BEG-E - 3-D Virtual Manufacturing Cell

FX-TRN-BEG-E Outline of the Lesson Plan 2
A-12
2.5.2 3-D Virtual Manufacturing Cell
A different machine is displayed for each exercise to be simulated.
• You can choose the view the machine by pressing the [F] / [T] / [S] button on the remote
control or selecting the direction on the "Tools" menu.
• The device numbers are assigned to all the inputs and outputs of the machine as seen in
the 3-D graphic simulation.
The I/O list can be displayed selecting "Edit"
→
"I/O list" on the simulation menu. The lists
are also found on the pages in the ’EXERCISES’ section in this manual.
Example of I/O list display
Side view
Front view
Top view