Mitsubishi MELSEC-F FX-TRN-BEG-E - Adding and Displaying Comments

FX-TRN-BEG-E Operation 3
C-19
3.3 Display and input of comments
This chapter explains how to display and input device comments.
3.3.1 Display of comments
The following is how to display device comments for devices in the program being edited.
• Displaying a comment
1) Select "View"
→
"Comment".
2) Comments are displayed.
• Changing the number of characters for device comments
You can select the number of characters of each displayed device comment between 16
and 32. When changing the number of displayed characters, follow the below procedure.
1) Select "Tools"
→
"Options".
2) When the ’Options’ dialog box is displayed, select 16 or 32 at ’Show device comment’.
Device comment
Select the number of characters for
the comment field.
16 characters 32 characters
X000
X000