Mitsubishi MELSEC-F FX-TRN-BEG-E - Writing Ladder Instructions

Operation 3
C-9
3. Operation
This chapter explains how to perform programming, online operations and printing.
Programming
Device test
ON
Monitoring
ON
Writing
You can transfer the
program to the virtual
PLC.
You can monitor how the
program is executed in the
virtual PLC.
→
3.4.1 Writing
to PLC
→
3.4.2 Monitor
display
Virtual PLC
Program
Program
You can set devices ON and
OFF, write values, confirm the
operation of the program.
→
3.4.3 Device test
You can write and convert
programs and enter device
comments.
→
3.1 Writing the program
3.2 Editing the program
3.3 Displaying and entering
comments
FX-TRN-BEG-E