FX-TRN-BEG-E F: Advanced Challenge 6
B-70
6.4 Sorting Defective Parts
6.4.1 Training Screen
6.4.2 Device Assignment
Category F: Advanced Challenge
Exercise F-4. Sorting Defective Parts
Objective Distinguish between defective parts and good parts by their signals.
Difficulty Level 3 (
★★★
)
Score (Class) 290 (Advanced programming)
Type Device No. Device name Operation
Input
X0 Drilling ON while drilling.
X1 Part under drill ON when part on conveyor is detected by drill.
X2 Drilled correctly
ON when part is drilled correctly. Previous result is
cleared when drilling starts.
X3 Drilled wrong
ON when part is not drilled correctly. Previous result is
cleared when drilling starts.
X4 Sensor ON when part is detected at the left end.
X5 Sensor ON when part is detected at the right end.
X10 Detect part ON when part is detected in front of pusher.
To Next Page
Loading...
