Mitsubishi Q01CPU User Manual

12
TROUBLESHOOTING
12.3 Error Code List
12.3.11 Error codes returned to request source during communication with CPU module
12 - 229
9
EMC AND LOW VOLTAGE DIRECTIVES
10
LOADING AND INSTALLATION
11
MAINTENANCE AND INSPECTION
12
TROUBLESHOOTING APPENDICES INDEX
4121
H
File-related
errors
File-related
errors
The specified drive (memory) or file does not
exist.
Execute again after checking the specified drive
(memory) or file.
4122
H
The specified drive (memory) or file does not
exist.
Execute again after checking the specified drive
(memory) or file.
4123
H
The specified drive (memory) is abnormal.
Execute programmable controller memory format to
make the drive (memory) normal.
In the case of the Flash ROM, check the data to be
written to the Flash ROM, and write them to the Flash
ROM.
4124
H
The specified drive (memory) is abnormal.
Execute programmable controller memory format to
make the drive (memory) normal.
In the case of the Flash ROM, check the data to be
written to the Flash ROM, and write them to the Flash
ROM.
4125
H
The specified drive (memory) or file is
performing processing.
Execute again after a while.
4126
H
The specified drive (memory) or file is
performing processing.
Execute again after a while.
4127
H
File password mismatch Execute again after checking the file password.
4128
H
File password mismatch with copy destination Execute again after checking the file password.
4129
H
Cannot be executed since the specified drive
(memory) is ROM.
Execute again after changing the target drive (memory).
412A
H
Cannot be executed since the specified drive
(memory) is ROM.
Execute again after changing the target drive (memory).
412B
H
The specified drive (memory) is write-
inhibited.
Execute again after changing the write inhibit condition or
drive (memory).
412C
H
The specified drive (memory) is write-
inhibited.
Execute again after changing the write inhibit condition or
drive (memory).
412D
H
The specified drive (memory) does not have
enough free space.
Execute again after increasing the free space of the drive
(memory).
412E
H
The specified drive (memory) does not have
enough free space.
Execute again after increasing the free space of the drive
(memory).
412F
H
The drive (memory) capacity differs between
the drive (memory) copy destination and copy
source.
Execute again after checking the drive (memory) copy
destination and copy source.
4130
H
The drive (memory) type differs between the
drive (memory) copy destination and copy
source.
Execute again after checking the drive (memory) copy
destination and copy source.
4131
H
The file name of the file copy destination is the
same as that of the copy source.
Execute again after checking the file names.
4132
H
The specified number of files does not exist. Execute again after checking the specified data.
4133
H
The specified drive (memory) has no free
space.
Execute again after increasing the free space of the drive
(memory).
4134
H
The attribute specification data of the file is
wrong.
Execute again after checking the specified data.
4135
H
The date/time data of the peripheral device
(personal computer) is beyond the range.
Execute again after checking the clock setting of the
peripheral device (personal computer).
4136
H
The specified file already exists. Execute again after checking the specified file name.
4137
H
The specified file is read-only.
Execute again after changing the condition of the
specified file.
4138
H
Simultaneously accessible files exceeded the
maximum.
Execute again after decreasing file operations.
4139
H
The specified file has exceeded the already
existing file range.
Execute again after checking the size of the specified
file.
Error code
(Hexadecimal)
Error item Error details Corrective action

Mitsubishi Q01CPU Specifications

General

Brand	Mitsubishi
Model	Q01CPU
Category	Controller
Language	English