EasyManuals Logo

Mitsubishi Q01CPU User Manual

Mitsubishi Q01CPU
732 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
1 - 17
1.1 Features
1
OVERVIEW
(9) Automatic writing to standard ROM
Note1.2
Note1.3
Note2
The Q Series CPU module enables writing the parameters or programs saved on a
memory card into the standard ROM of the CPU modules without using GX
Developer.
When the standard ROM is used to perform ROM operation, you can load a memory
card into the CPU module and write parameters/programs on the memory card to the
standard ROM. Hence, you need not carry GX Developer (personal computer) to
rewrite the parameters/programs.
(10)Forced ON/OFF of external I/O
Note1.2
The Q Series CPU module enables forcedly turning on/off the external I/O by
operating GX Developer regardless of the program execution status (even if the CPU
module is running).
Using the Q Series CPU module allows the wiring test and/or operation test execution
by turning on/off the I/O forcedly without halting the CPU module.
(11)Remote password can be set
When access to an Ethernet module, serial communication module or modem
interface module is made from the outside, whether access to the CPU module is
enabled or not can be selected with a remote password.
(12)Remote I/O network of MELSECNET/H can be configured
Note1.2
The Q Series CPU module allows construction of the MELSECNET/H remote I/O
system by attaching the remote master station of the MELSECNET/H.
POINT
1. The remote password can be set up when the Ethernet module, serial
communication module or modem interface module of function version B or
later is used.
2. The MELSECNET remote I/O network can be implemented when the
MELSECNET/H network module of function version B or later is used.
Note2
Basic
Note1.2
The Basic model QCPU does not support the following functions:
Automatic writing into the standard ROM
Forced on/off of the external I/O
MELSECNET/H remote I/O network
Basic
Note1.2
The Universal model QCPU does not support the following functions:
Parameter setting of automatic write to standard ROM
Universal
UD
Note1.3
Universal
UD
Note1.3
Basic
Note1.2
Basic
Note1.2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi Q01CPU and is the answer not in the manual?

Mitsubishi Q01CPU Specifications

General IconGeneral
BrandMitsubishi
ModelQ01CPU
CategoryController
LanguageEnglish

Related product manuals