2
SYSTEM CONFIGURATION
2.1 System Configuration
2.1.3 Configuration of peripheral devices
2 - 34
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
GENERAL
SPECIFICATIONS
4
HARDWARE
SPECIFICATIONS OF
THE CPU MODULE
5
POWER SUPPLY
MODULE
6
BASE UNIT AND
EXTENSION CABLE
7
MEMORY CARD AND
BATTERY
8
CPU MODULE START-
UP PROCEDURES
(4) When the Universal model QCPU is used
(a) QnU(D)(H)CPU
* 1: Format the ATA card by GX Developer only. ( Section 7.1.4.)
* 2: For the writing to the memory card and the USB cable details, refer to the following:
GX Developer Operating Manual
* 3: For the GX Developer and GX Configurator versions compatible with the Universal model QCPU,
refer to Section 2.1.4.
Diagram 2.27 Configuration of peripheral devices
1
Memory card
1
Memory card
PC card
adapter
3
Personal Computer
(GX Developer, GX Configurator)
Universal model QCPU
Ethenet cable
USB cable
(Connector type miniB)
2
4
To Next Page
Loading...
Need help?
General
