APP - 20
PPENDICES
(b) When the sample data is overwrite to the created project.
1) Motion CPU area
END
START
Sample data
Save folder
C:
Program Files\MELSOFT\MTD2\SampleData\MT2
Project name
SV13: Q170M_SV13_MT2
SV22: Q170M_SV22_MT2
Start-up MT Developer2.
Create the project.
Divert the following sample data
in the basic setting of System
setting.
Base setting
Multiple CPU setting
2) PLC CPU area
START
Start-up GX Developer.
Create the project.
END
Sample data
Save folder
C:\Program Files\MELSOFT\MTD2\SampleData\GX1
Project name
SV13: Q170M_SV13_GX1
SV22: Q170M_SV22_GX1
Diversion file
"COMMENT" of device comment
Divert the following sample data
in the Multiple CPU settings or I/O
assignment of PLC parameter.
I/O assignment
PLC system
Multiple CPU settings
Divert the following sample data
by making a copy of project.
Device comment
POINT
The existing data are overwrite and erased by diverting the sample data to the
created project.
To Next Page
Loading...
