Mitutoyo ABSOLUTE ABS AT1123 - Page 10

viii
No. 99MBE095B
3.2 Mounting the Scale Main Unit and Adjusting the Position ………………………15
3.2.1 Checking the Mounting Surface, etc.………………………………………………………15
3.2.2 Mounting the Scale Main Unit ………………………………………………………………16
3.3 Mounting the Detector Head and Adjusting the Position ………………………19
3.3.1 Mounting the Detector Head ………………………………………………………………19
3.4 Connecting and Fixing the Signal Cable …………………………………………24
3.4.1 Cable Connection and Operation Check …………………………………………………24
3.4.2 Connecting the Signal Cable ………………………………………………………………25
3.4.3 Precautions on Fixing the Cables …………………………………………………………27
4 Specications ……………………………………………………………………………29
4.1 Specications ………………………………………………………………………29
4.2 Signal Cable Specications ………………………………………………………30
4.2.1 Output Signal …………………………………………………………………………………30
4.2.2 Cable Dimensions ……………………………………………………………………………31
4.3 System Conguration (Example) …………………………………………………32
4.4 Alarm Detection Function …………………………………………………………33
4.4.1 Alarm Detection Function …………………………………………………………………33
4.4.2 Alarm Code Content …………………………………………………………………………34
4.5 Air Purging ……………………………………………………………………………35
4.5.1 Air Flow Supplied to the Scale ……………………………………………………………35
4.5.2 Recommended Air Supply Devices ………………………………………………………35
4.5.3 Connection …………………………………………………………………………………… 37
4.6 External View and Dimensional Drawings of the Scale Main Unit ……………38
4.6.1 External View and Dimensional Drawings ………………………………………………38
4.6.2 Dimensional Table …………………………………………………………………………40
5 Troubleshooting …………………………………………………………………………41
6 Appendix …………………………………………………………………………………… 43
6.1 Quantity of the Supplied Accessories for Mounting ……………………………43
SERVICE NETWORK …………………………………………………………………… App-1