25
3 Mounting onto the Machine
No. 99MBE095B
3.4.2 Connecting the Signal Cable
1
Decide the signal cable connecting direction.
Detector head
Signal cable (option)
Cable connecting direction: Left
Cable connecting direction: Right
Initially, the signal cable outlet panel is provided on the left side signal cable outlet on the detector
head.
To set the left side as the cable connecting direction, remove the signal cable outlet panel which is
attached to the signal cable outlet.
Also, there is a signal cable outlet seal between the signal cable outlet panel and the detector head.
When removing the signal cable outlet panel, make sure that the signal cable outlet seal does not
come o. If it comes o, insert it into the groove of the detector head.
Detector head
Signal cable outlet seal
Signal cable outlet panel
Countersunk screws (M2.6x5)
Signal cable outlet
To Next Page
Loading...
