Mitutoyo ABSOLUTE ABS AT1123 - Signal Cable Specifications

30
4Specications
No. 99MBE095B
4.2
SignalCableSpecications
Note that the output signal of the signal cable di󰀨ers according to the interface specications.
4.2.1 Output Signal
Note that the output signal of the signal cable of AT1123 di󰀨ers from that of AT1153 or AT1143.

Cable of discrete-wire specication (for SIEMENS connection)
Cable color Signal Cable color Signal
White/Brown +24 V White/Orange TXP
Brown GND Orange TXN
White/Blue TEST White/Green RXP
Blue
TEST Green RXN
Shielded wire F.G
* Keep the test pins (TEST,TEST) unconnected.
* Connect the shielded wire to the ground bar.
* A cable of discrete-wire specication (for SIEMENS connection) cannot be used for ABS AT1153 or
ABS AT1143.

Cable of M12 connector specication
Pin No. Signal Pin No. Signal
1 +24 V 5 GND
2 TEST 6 TXN
3 RXP 7 TXP
4 RXN 8
TEST
Shield sleeve F.G
* Keep the test pins (TEST,TEST) unconnected.