Mitutoyo ABSOLUTE ABS AT1123 - System Configuration Examples

32
4Specications
No. 99MBE095B
4.3
SystemConguration(Example)
The following describes an example of the system conguration.
Please note that some parts need to be prepared by the user.
Signal cable: SIEMENCE I/F specifications (option)
Extension cable (1) Extension cable (2)
* Extension cable (1) and (2) need to be prepared by the user.
To SIEMENS
DRIVE-CLiQ-supported
controller
To SIEMENS
DRIVE-CLiQ-supported
controller
Extension cable (2)
Connection example (1)
Signal cable
Total length 29 m
Signal cable Extension cable (2)Extension cable (1)
Total length 29 m
AT1123
AT1123
DRIVE-CLiQ connector
M12 8-pin
DRIVE-CLiQ connector
RJ45 IP20
Pin No.
Pin No.
Pin No.
Signal
Signal
Signal
Pin No.
connector shell
Shielded wire
Shielded wire
Signal
DRIVE-CLiQ connector
M12 8-pin
DRIVE-CLiQ connector
M12 8-pin
connector shell
connector shell
Connection example (2)
To SIEMENS
DRIVE-CLiQ-supported
controller
connector shell
y Extension cable (1) SIEMENS Part No.: 6FX8002-2DC34-□□□□
y Extension cable (2) SIEMENS Part No.: 6FX8002-2DC30-□□□□
Tips
• Extension cables need to be prepared by the user.
• Select cables so that the total length of the signal cable and extension cable becomes 29 m or less.
• Contact SIEMENS for specications of their extension cables and how to purchase.
• Keep the test pins (TEST,
TEST ) unconnected.