Mitutoyo ABSOLUTE ABS AT1123 - Verifying Scale Unit and Accessories

6
2 Setup for Mounting
No. 99MBE095B
2.2
CheckingtheScaleUnitandtheSuppliedAcces-
sories
A conguration of this product is shown below.
First, make sure that there are no missing components in the supplied accessories.
Also, check for any damage that may have occurred during transportation.
If you have any questions or concerns about the product, please contact your dealer or the nearest
Mitutoyo sales o󰀩ce/service center.
Scale main unit
Signal cable (option)
(Air supply inlet)
* provided on both sides
with M5 screws
Detector head
Items Quantity Note
1 Scale unit 1 axis
2 Accessories 1 set Mounting screws, etc.
3 User's Manual (this document) 1 copy
4 Warranty card 1 copy
5 Inspection certicate 1 copy
z
Accessories (mounting screws, etc.)
Hex socket head
cap screw
M6x40
Hex socket head
cap screw
M6x30
Internal teeth shake
proof washer
6.6×10.2×0.5
Nominal 6 small
round at washer
Frame holding
spring
For the details of the quantity of the accessories, refer to "6.1 Quantity of the Supplied Accessories
for Mounting" on page 43.