2
1 Outline
No. 99MBE095B
1.2
Appellation and Functions of Each Part
We call this product the "scale unit" generically. The scale unit is composed of the scale main unit and
the detector head.
The following is the explanation as to appellation and functions of each part.
①
②
③
④
⑤
⑥
⑤
①
Scale unit The generic appellation of this product. Indicates the state that the detec-
tor head has been mounted on the scale main unit.
②
Scale main unit Represents the linear scale's main unit.
③
Detector head The part to detect a measurement point.
④
Full-xing part The datum position for length variation due to changes in temperature
(reference point for the scale’s mechanical expansions and contractions
due to changes in temperature). The point to be xed rst during installa-
tion onto the machine main unit.
⑤
Elastic xing parts The point to be xed later during installation onto the machine main unit.
⑥
Signal cable (option) The cable to connect this product and the connection destination con-
troller. You can connect the signal cable to either left or right side of the
detector head.
To Next Page
Loading...
