Mitutoyo ABSOLUTE ABS AT1123 - Connection

37
4Specications
No. 99MBE095B
4.5.3 Connection
Do not supply air to the air device directly from the compressor. Make sure to supply compressed air
through a main line air lter.
Attach the xed diaphragm to the scale side.

When supplying air to linear scales with 2 axes:
IN
OUT
T-joint
Tube (ø6)
Output pressure
Air device Fixed diaphragm

When supplying air to linear scales with 3 axes:
IN
OUT
T-joint
Tube (ø6)
Output
pressure
Air device
Fixed diaphragm
Tips
• Five scales (ve axes) at maximum can be connected to one air device.
• Use a ø6 air tube.
(*1) Each lter element should be replaced after a year.
The time of replacement di󰀨ers according to the operating conditions.
(*2) For information on maintenance, refer to the manual supplied with the air device.