Mitutoyo ABSOLUTE ABS AT1123 - Mounting onto the Machine; Mounting Procedure Overview

15
3 Mounting onto the Machine
No. 99MBE095B
3
Mounting onto the Machine
This chapter describes the procedures, methods, and precautions required when mounting
thisproductontothemachine.
3.1
Procedure for Mounting onto the Machine
The following describes the summary of the procedure for installing this product onto the machine.
Mounting the Scale Main Unit and
Adjusting the Position
Mounting the Detector Head and
Adjusting the Position
Connecting and Fixing the
Signal Cable
Details of each step are described in the following pages.
3.2
Mounting the Scale Main Unit and Adjusting the
Position
3.2.1 Checking the Mounting Surface, etc.
Refer to "2.4.5 Precautions on Designing the Mounting Surface" and "4.6 External View and Di-
mensional Drawings of the Scale Main Unit", and make sure that the positional accuracy and the
surface accuracy between the scale main unit and the detector head mounting surfaces are within the
specied ranges.