Mitutoyo ID-C - Page 101

89
No. 99MAH057A
9Specications
Common to all models
Protection level
*2
IP42
*3
CEmarking/
UKCAmarking
EMC Directive/Electromagnetic Compatibility Regulations:
EN 61326-1
Immunity test requirement: Clause 6.2 table 2
Emission limit: Class B
RoHS Directive/The Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic
Equipment Regulations: EN IEC 63000
Power supply Lithium metal battery CR2032
Battery life
*4
Normal use: Approx. 2.5 years,
Continuous use: Approx. 2,700 hours
Scale Electrostatic capacitance type absolute linear encoder
Response speed Unlimited
Display of 7 segments 11 mm
Display of analog bar ±20 scale
Display rotate 330°
Functions
Zero set, Preset, Peak detection
*5
, Counting direction
switching, Tolerance judgment, Simple calculation, Key
customize, Function lock, Auto OFF, Calibration schedule
warning display, Battery voltage decrease display, Error
warning display, Unit system switching
*6
Data output DIGIMATIC d1, DIGIMATIC d2
I/O DIGIMATIC S1
Temperature range Operation: 0 °C – 40 °C, Storage: -10 °C – 60 °C
Standard accessories
User'smanualwithwarranty,Certicateofinspection,
Lithium metal battery CR2032, Battery holder opener (Part
No. 21EAB049), Lifting lever (Part No. 21EAA426)
*1: During normal measurement at 20 °C.
*2: The protection level (IP: International Protection) is based on IEC 60529/JIS C 0920.
*3: Values are for factory conditions.
*4: The battery life varies depending on usage times and conditions.
The above values are guidelines.
*5: The peak detection speed is 50 times/s.
*6: Other than ID-C0525NXB, ID-C1025NXB, ID-C0550NXB, ID-C1050NXB.