Mitutoyo ID-C - Selecting the Tolerance Judgment Result Display Method and Setting Allowable Values

45
No. 99MAH057A
5 Setting Parameters
(Short press) / (Long press)
1 Pressthe[F2]key.
» Resolution can be set.
2 Pressthe[F1]keyor[F3]keytosettheresolution.
» Each time the key is pressed, it will switch the resolution.
3 Pressthe[F2]key.
» Settingsareconrmed;shiftstothenextparameteritem.
(Go to "5.6 Selecting the Tolerance Judgment Result Display Method
and Setting Allowable Values" on page 46.)