Mitutoyo ID-C - Page 50

38
5 Setting Parameters
No. 99MAH057A
(Short press) / (Long press)
■Display order of parameter items
F1
F2
F2
F2
F2
F2
F3
F1
F1
F1
F3
F1
F3
F1
F3
F1
F3
F1
F2
F2
F1
F3
F1
F3
F3
F2
F2
F2
F1
F3
F1
F3
"5.2 Selecting Measurement Mode" on
page 40
"5.3 Selecting Unit System" on page 41
"5.4 Selecting Counting Direction" on page 42
"5.5 Selecting Resolution" on page 44
"5.6 Selecting the Tolerance Judgment Result
Display Method and Setting Allowable Values"
on page 46
"5.7 Setting Calculation Function Selection and
CalculationCoe󰀩cient"onpage50
"5.8 Selecting Analog Bar Display" on page 55
"5.9 Selecting Switch Function" on page 59
"5.10 Setting Function Lock" on page 63
"5.11 Change Other Functions" on page 64
•
"5.11.2 Calibration Schedule Warning Selection/Setting" on page 65
• "5.11.3 Selecting Digimatic Output" on page 70
• "5.11.4 Auto OFF setting" on page 71
• "5.11.5 All Reset" on page 72