Mitutoyo ID-C - Page 66

54
5 Setting Parameters
No. 99MAH057A
(Short press) / (Long press)
Tips
• Press and hold the [F1] key to stop or cancel settings midway through.
• Asaresultofcalculationprocessing,adisplayvalueoverowerror(Err30)may
occur. For details, see
"7 Error Displays and Countermeasures" on page 75.
• Thedefaultsettingofthecalculationcoe󰀩cientisA=1.
• Ifthecalculationcoe󰀩cientAissetto00.0000,acalculationcoe󰀩cientsettingerror
(Err91)willoccur.Pressthe[F2]keyandresetitsothatA≠0.
• Calculationcoe󰀩cientisnotconvertedevenwhentheunitsystemorresolutionis
switched.