1.4.2 Installing VL-50AS
Fig.005 Names of VL-50AS Components
(1) Display unit/control unit
Displays 8-digit measurement values, sign, unit, measurement hold status (HOLD), etc.,
with indicator LEDs.
(2) Spindle
(3) Contact point
(6) Motor drive connecting cable (2m): for VL-50AS only.
(7) Counter connecting cable (2m): for VL-50AS only
(8) Measured data output connector Outputs measured data to a Digimatic mini-processor,
etc.
(9) RS-232C connector
(10) External control connector
Used to connect this instrument to an external device for remote control.
It can be connected to an external switch or a computer.
(11) GND terminal
(12) Foot switch
(13) Power switch
(14) DC. IN: Input connector of DC power from the AC adapter
(15) AC adapter cord clamp
(16) CONTROL connector: for VL-50AS only
(17) INPUT connector: for VL-50AS only
No. 99MBC082B
1 - 4
To Next Page
Loading...
