Mitutoyo Litematic VL-50A - I;O Function

I/O FUNCTION
This chapter describes the I/O function related to data input and
output.
8
8.1 Connector Terminal Function
8.1.1 Outline of the function
I/O functions allows tolerance judgment output and system control by external signal of spindle.
NOTE
Prepare the connection cable by users.
19
36
18
1
Receptacle: 10236-52A2(Manufacturer :3M,half-pitch 36-pin,female)
Plug: 10136-3000VE(Manufacturer :3M) or equivalent
Cover: 10336-52A0-008(Manufacturer :3M) or equivalent
Reference circuit of external equipment
Application:Tolerance judgment output ,NOMAL
Operation : Transistor turned ON at “L” (open-collector output)
5K
Ω
COM
0.01uF
Counter
TD62583 or the
e
q
uivalent
74HC14 or the
equivalent
+5V
Output
Maximum output voltage: 24V
Maximum output current: 10mA
Maximum saturation voltage: 0.7V
Reference
circuit of
external
equipment
5K
Ω
5K
Ω
0.01uF
Counter
+5V
Use open-collector
output or relay output,
etc
Maximum input current::1mA
Input voltage(H):4 – 24V
In
p
ut volta
g
e
(
L
)
:1V max.
Input circuit
A
pplication: P.SET, HOLD,SET
O
p
eration: In
p
ut enabled at “L”
Pin assignment
No. 99MBC082B
8 - 1