1. OUTLINE
1.4 Name of Each Part
1.4.1 Installing VL-50A
Names of VL-50A Components
(1) Display unit/control unit
Displays 8-digit measurement values, sign, unit, measurement hold status (HOLD), etc.,
with indicator LEDs.
(2) Spindle
(3) Contact point
(4) Worktable (made of ceramic): for VL-50A only
(5) Worktable clamp: for VL-50A only
(8) Measured data output connector
Outputs measured data to a Digimatic mini-processor, etc.
(9) RS-232C connector
(10) External control connector
Used to connect this instrument to an external device for remote control.
It can be connected to an external switch or a computer.
(11) GND terminal
(12) Foot switch
(13) Power switch
(14) DC. IN: Input connector of DC power from the AC adapter
(15) AC adapter cord clamp
No. 99MBC082B
1 - 3
To Next Page
Loading...
