Mitutoyo Litematic VL-50A - Timing Chart

8. I/O FUNCTION
8.2 Timing Chart

(1) Power On characteristics
MAX30ms
MIN30ms
NORMAL
HOLD
Power supply
MIN 2 sec *


*In case of RS_LINK connection, this interval is determined
by the status when the counter was on last.
(4)

MODE/.UP/DN

timing
MODE UP DN
SET1,2
MIN12ms MIN12msMIN6ms
MAX12(100)ms
DATA
( ) indicates a value in the Smoothing (“soft”)
(5) HOLD ,
Error clear
MIN15ms
Data output (*2)
MAX30ms
Error clear
MAX10us(
±
100ms)(*1)
Data latch
HOLD
MIN15ms
*1: The value in ( ) is that at the time of smoothing.
*2: In case of parameter 28 and HOLD selection 1
(2) External presetting
MIN15msMIN15ms
P.SET
Not available during key input, RS-232C input, and
Digimatic data processing.
(6) Peak clear
MIN15ms
MIN 0ms
MIN7ms
P SET
HOLD
MIN15ms
(3) Tolerance judgment result output timing
MAX16(100)ms
MAX16(100)ms
L5
L1
Min.
Max
.
( ) indicates a value in the Smoothing (“soft”)
No. 99MBC082B
8 - 3