Miyachi Unitek UNIFLOW 2 User Manual

CHAPTER 1: DESCRIPTION
UNIFLOW
®
2 PULSED THERMODE CONTROL
990-228 1-7
HEAT / NO HEAT Switch
When this switch is in the HEAT position, the programmed profile can initiate
heating energy.
When you set the switch to the
NO HEAT position, no heating current can flow.
This function is required to adjust a new thermode to the work pieces prior to
initiating a heating cycle.

Miyachi Unitek UNIFLOW 2 Specifications

General

Brand	Miyachi Unitek
Model	UNIFLOW 2
Category	Controller
Language	English