Moeller EC4-200 - Changing or Deleting the Password Range

Description of settings
05/06 AWB2724-1584GB
30
The PASSWORD… entry will flash.
X Press OK to enter the password
entry menu.
The password entry field is shown.
X Set the password using the cursor
buttons.
X Confirm with OK.
If the password is correct, the Status display is reactivated.
The PROGRAM… menu item is
enabled.
The System menu is also accessible.
Changing or deleting the password range
X Enter your password.
X Press DEL and ALT to call up the System menu.
X Open the password menu via the menu option SECURITY… and
PASSWORD…
The CHANGE PW entry will flash.
This menu is only displayed if a
password is present.
X Press OK to enter the password
entry menu.
X Press OK to move to the 6-digit
entry field.
X The current password will be
displayed.
X Modify the six password digits
using the cursor buttons.
X Confirm with OK.
Press ESC to exit the security area.
Deleting
Use number combination “000000”
to delete a password.
Six dashes will appear if no
password is entered.
Password incorrect or no longer known
Have you entered an incorrect
password?
X Re-enter the password.
This can be repeated as many times as required!
Pressing ESC returns you to the starting menu
Deleting the password (via PC)
X Log on to the PLC.
If you call the browser command “factoryset”, the password, the
user program and the boot project will be deleted, and the
controller will be reinitialised with the default parameters
a section “Reset”, page 38.
X Call the browser command “factoryset”.
h
If the main menu shows PROGRAM… instead of
PASSWORD…, this means that password protection is
not activated.
PASSWORD
STOP RUN å
PASSWORD
SET CLOCK
ENTER PASSWORD
XXXXXX
PROGRAM
STOP
PARAMETER
SET CLOCK
CHANGE PW
ACTIVATE PW
ENTER PASSWORD
XXXXXX
ENTER PASSWORD
100005
ENTER PASSWORD
------
h
If you have lost the password, you can only change or
delete it via the PC.
ENTER PASSWORD
XXXXXX