05/06 AWB2724-1584GB
Changing the menu language
31
Changing the menu language
Two menu languages can be selected. These can be set via the
System menu.
X Press DEL and ALT to call up the System menu.
X Select MENU LANGUAGE… to change the menu language.
The language selection for the first
entry ENGLISH is displayed.
X Use Í or Ú to select the new
menu language.
X Confirm with OK. The language will be assigned a tick.
X Exit the menu with ESC.
The new menu language is active.
Press ESC to return to the Status display.
Setting date and time
The devices are provided with a real-time clock with date and time.
Set the hour, minute, day, month and year during initial
commissioning.
X Select SET CLOCK… from the main menu.
This will open the menu for setting
the time.
X Select SET CLOCK.
X Set the values for time, day,
month and year.
X Press OK to activate Entry mode.
– úí Move between the
parameters
– ÍÚ Change the value of a parameter
– OK Save day and time
– ESC Retain previous setting.
Press ESC to leave the time setting display.
Startup behaviour
Setting the startup behaviour
The following start options can be set via the menu:
• HALT
•WARMSTART
•COLDSTART
X Switch to the System menu.
X Set the Startup behaviour.
Setting LCD contrast and backlight
The background illumination of the LCD display can be switched
off. The display contrast can be set to one of five stages. The
display is not required during operation. The backlight is only
required during maintenance and when texts have to be displayed.
X Switch to the System menu.
X Select the SYSTEM menu.
X Press the OK button.
X Use the Ú button to select the
DISPLAY menu and press OK.
The menus for setting the contrast
and backlight are displayed.
X Press the OK button and move to
the contrast entry field
Use the Í and Ú cursor buttons to
set the contrast to a value between
–2 and +2.
X Select your setting.
X Complete your setting by
pressing OK.
The contrast setting is valid until it is changed again.
Language LCD display
English ENGLISH
German DEUTSCH
h
The language selection is only available if the controller is
not protected by a password.
ENGLISH
DEUTSCH å
SET CLOCK
HH:MM: 00:27
DD.MM 05.05
YEAR : 2002
h
If the controller is password-protected, the System menu
is only available after the password has been entered
(a section “Access with password protection”,
page 29).
h
If the controller is password-protected, the System menu
is only available after the password has been entered
(a section “Access with password protection”page 29.
SECURITY
SYSTEM
STARTPARAMETER...
MENU LANGUAGE...
RESTART
DISPLAY
FACTORY SET
CONTRAST 0
LIGHTING å
CONTRAST: +1
LIGHTING å
CONTRAST: +1
LIGHTING å
To Next Page
Loading...
