monolith HTP-1 - Page 4

HTP-1 Installation and User Guide Release 1.8.1
Multiple Subwoofers and Dirac Live Bass Control™ 31
Mapping Channels to Speakers 31
Speaker Setup 32
Setting Speaker Size 33
Enabling Speakers 34
Dolby® Enabled Speakers 35
Example Speaker Setups 36
Back Panel Mapping Display 37
Example 7.1.4h Speaker Configuration (Upper Level On the Wall) 38
Example 7.2.6 Speaker Configuration (Upper Level On the Ceiling) 39
Example 9.3.4 Speaker Configuration (Upper Level On the Ceiling) 40
Example 9.1.6 Speaker Configuration (Upper Level On the Ceiling) 41
Configure the Bass Manager 42
Calibration 44
Volume Range and Maximum Output Voltage 45
Recommendations on setting the Maximum Output Level 46
Lipsync Delay 46
Dirac Calibration 47
Calibration Steps 48
Dirac Bypass 53
Dirac On 53
Dirac Bypass 53
Dirac Off 54
Tips for a Successful Dirac Calibration 54
Manual Calibration 55
Calibrating for Higher Sample Rates 55
Dirac Live Bass Control 55
HTP-1 User Manual Page 4 V1.8.1