Monosem MS Series - MS Version M Sync Chart and Setting Instructions for Timing Non-Staggered Units

OPTIONS
uuf6xgz,1683011502228-19-05JUN23-1/1
MSVersionMSyncChartandSetting
InstructionsForTimingNon-StaggeredUnits
APY71694—UN—08MAY23
TimeableMeter
TimingInstructions
1.Installthetimingindicator#804060onthemeterthat
isbeingtimed.
2.Turnthemainhexshaftuntilalltheslackisremoved
fromthedrivechainsandthecenterofadischoleis
alignedwiththeendofthesingulatoronthemeter
withoutthetimingsprocket.
3.Locatetherequiredoffsetangleontheleftchartbelow.
NOTE:Ifconcecutivemeteresarebeingtimed,
theoffsetanglewillalternatebetweenthe
numberlistedinthechartandzerofor
eachsubsequentmeter.
4.Loosenthelockingsetscrewsonthetimingsprocket.
5.RotatethemeterdiscCCWtoremoveanyslackwhile
adjustthetimingsetscrewonthetimingsprocketuntil
thebackofadischolematchestheoffsetangleonthe
indicator(CWtodecreaseangle&CCWtoincrease
angle).
6.Tightenthelockingsetscrewsonthetimingmeterand
replacethetimingindicatorwiththeoriginalsingulator.
APY71693—UN—08MAY23
Timingsprocket#100596
A—IndicatorTool#804060
B—OffsetAngle
C—OffsetAngleof6°
D—TimingScrew
E—LockScrew
60-5
062623