Montronix PulseNG Kit - Software PulseNG-hmi; PulseNG-hmi Installation and Usage

OPI-PulseNGKit-en-141106
Version: 2.01
Page 15 of 31
R
021,725,1*62/87,216
Operating Manual
PulseNG Kit
Software PulseNG-hmi
Installation
Every PulseNG system delivery includes the software PulseNG-hmi.
The CD-ROM contains:
• Installation routine of Puls eNG-hmiUser interfaceOperating manual as PDF le
Please start Setup-PulseNG-hmi-revxxx.
Initial values ensure that you will directly obtain connection with
the IBU-NG if you are using the factory default settings.
Software version
The current PulseNG-hmi software version and the required rmware can be checked
by using the soft key „About“.
Using the software
A left double click opens that particular window by itself.
You can navigate through the program on several levels.
The specic navigation level being used is indicated in the operating manual by the
number to the left of the softkey bar. The softkey referred to in the current description
is shown in gray.
1
Reset
alarms
Teach Settings Save limits