Moog Matriarch User Manual

55
MAIN OUTS
Connect Matriarch to an amplifier, monitoring system, or
audio interface using the 1/4” MAIN OUT LEFT (MONO)
and MAIN OUT RIGHT jacks to enjoy sounds in stereo.
If this is not possible, the MAIN OUT LEFT (MONO) jack
is normalled to provide a mono mix of both the Left and
Right channels when nothing is connected to the MAIN
OUT RIGHT jack.
AUDIO OUTPUTS: +4dBu
NOTE: The MAIN OUT jacks will work with both TS and TRS
1/4” cables.
HEADPHONE VOLUME / HEADPHONE OUT
Connecting a pair of stereo headphones to the 1/4”
HEADPHONE OUT jack allows for private listening and
cueing up of new sounds in a live setting. The volume level
of the HEADPHONE OUT jack is controlled only by the
adjacent HEADPHONE VOLUME knob, and is unaffected
by the MAIN VOLUME knob on the front panel.
AUDIO OUTPUT: TRS output; 1.1V into a 16 Ohm load
INSTRUMENT IN
A monaural audio signal from another instrument (guitar, drum machine,
synthesizer, etc.) can be connected to Matriarch via this 1/4” input. An audio
signal applied to this input is then fed directly into the Mixer module to be
processed along with the onboard audio sources.
AUDIO INPUT: Instrument-level TS input with +20dB of gain
EURO OUT
These outputs provide a duplicate of the audio signal
emerging from the MAIN OUT LEFT (MONO) and the
MAIN OUT RIGHT jacks, but at Eurorack levels, so that
Matriarch can be processed by or integrated with a
Eurorack modular system.
AUDIO OUTPUTS: 10V peak-to-peak
NOTE: The EURO OUT (L) and EURO OUT (R) outputs are
unaected by the MAIN VOLUME knob in the Output module.
REAR PANEL (Continued)

Moog Matriarch Specifications

General

Product type	Analog synthesizer
Sound effects	Delay
Sound effects quantity	1
Keyboard number of keys	49
Maximum polyphony (notes)	4
MIDI in	Yes
6.35 mm (1⁄4-inch) input	3
6.35 mm (1⁄4-inch) output	2
Input voltage	240 V
DC input voltage	12 V
Power source type	DC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	361 mm
Width	810 mm
Height	139 mm
Weight	13610 g