www.miinet.comMoore Industries-International, Inc.
- 15 -
User’s Manual
225-748-00P
August 2024
Section 3 - Installation and Wiring
Instructions in this section and others may require special precautions to ensure the safety of the
personnel performing the operations. Notes, Cautions and Warnings that may cause potential
safety issues are indicated throughout this manual by symbols, please refer to Page 3 of this
manual to view and familiarize yourself with these safety message symbols.
Note: Make sure to calibrate and bench check the instruments prior to installation. Also,
install all instruments in their intended application and on their rail before making any electrical
connections. Allow enough room for pivoting instruments vertically on the rail for removal in
applications involving multiple banks of STAs.
Note: Any changes to Security Settings will need to be made prior to installation and wiring refer
to Security Settings later in this section.
Dimensions
Figure 3.1. Dimensions of Aluminum DIN-Housed STA TPRG
56mm
(2.2 in)
102mm
(4.0 in)
142mm
(5.6 in)
132.68
DEG C
Programmable RTD, T/C, Ohms, mV and Potentiometer Safety Trip Alarm
STA
TPRG
SECTION 3
To Next Page
Loading...