Morbark M20R - Page 37

03/15 • 37
Shut-down
o
The ignition key is out of the machine and control panel is locked.
o
The chipper drum has completely stopped rotating.
o
The machine has cooled down for 15-20 minutes.
o
All storage areas and covers are locked and secured.
o
The work site is cleared of all debris.
o
Infeed is clear of debris.
o
If towing, the tongue is properly hitched to the towing vehicle.
o
Infeed bed transport pin is locked and secure (If applicable).
o
Chipper set-up for operation.
SAFETY OPERATION