Safety
1-12 January 2019
Lighting and Marking
MORRIS recommends the use of correct lighting and
marking to meet the ASAE standard for roadway travel.
Be familiar with and adhere to local laws.
Amber warning and red tail lights secured on the machine
promote correct transportation of this implement.
Note: Always replace missing or damaged lights
and/or connectors.
Amber warning and red tail lights must be mounted to
the rear of the implement and be visible from front and
rear. The lights must be within 16 inches (41 cm) of
the extremities of the machine and at least 24 inches
(60 cm) but not over 10 feet (3 m) above ground level.
Note: Always replace missing or damage front,
side, rear reî››ectors and SMV emblem.
N34478 - Orange Reflector
N34476 - Red Reflector
Rear View
To Next Page
Loading...
