Storage
7-2 January 2019
Preparing for Storage
• To insure longer life and satisfactory operation,
store the implement in a shed.
• If building storage is impossible, store away from
areas of main activity on rm, dry ground.
• Clean machine thoroughly.
• Inspect all parts for wear or damage.
• Avoid delays - if parts are required, order at the end
of the season.
• Lubricate grease ttings. (Refer to Maintenance
Section).
• Tighten all bolts to proper specications (Refer to
Maintenance Section).
• For a safer storage, lower the implement into eld
position and release the hydraulic pressure.
• If implement must be stored in a raised position,
ensure that wings are properly secured with lock
pins.
• Level implement using hitch jack and block up.
• Relieve pressure from hydraulic system.
• Cover tires with canvas to protect them from the
elements when stored outside.
• Coat exposed wing lift cylinder shafts (Refer to Wing
Lift Cylinder Shaft Protection).
• Paint any surfaces that have become worn.
MORRIS PAINT
Part Number Description
W-4647 Red MORRIS Spray Can
N31087 White MORRIS Spray Can
Z-10 Red MORRIS Paint/Litre Can
Warning
Do not allow children to play
on or around the machine.
To Next Page
Loading...
