Operation
5-18 January 2019
Controller Options - Continued
Topcon - X35 Apollo - Continued
Hydraulic Pressure Control Setup
In the set-up Menu go to: Implement - Seeder - Drill Control - Pack Control
Set Preset1: 700PSI (use settings based on eld soil types)
Increment psi: 25
Pack Force Sensor: Disabled
Drive: Apollo CM-40 2- Drive 1
2 Tank units – Apollo CM-40 1 – Drive 1
3 Tank Units – Apollo CM-40 1 – Drive 1
If equipped with Liquid Sectional Control Pack Control to - Apollo CM-40 2 – Drive 1
To Next Page
Loading...
