Morris Quantum - General Guidelines

Operation
5-36 January 2019
TAKE SAFETY SERIOUSLY.
Do Not Take Needless Chances!
Caution
Care should be taken when
working near the air cart
while the fan is running.
Product blowing out of
the system could cause
personal injury.
General Guidelines
The results obtained from the Morris QUANTUM Drill
are directly related to the depth uniformity of the unit.
Worn points, uneven tire pressures, and bent shanks
must be avoided to obtain optimum eld results.
• Operating depth should be uniform at all opener
locations, when spot checking the implement in the
eld.
• Check openers running in tractor or air cart tracks
and adjust depth accordingly.
• Repair or replace bent shanks. Bent shanks cause
openers to work at uneven depths and can cause
unnecessary ridging. See Maintenance Section.
• Keep tire pressure at the listed specications to
maintain proper level. See Maintenance Section.
• Have Air Drill moving forward before lowering into
ground to avoid plugging openers.
• Avoid sharp turns. Turns sharp enough to cause
the inside openers of the air drill to reverse direction
are not recommended. This may cause the seed
openers to plug.