Need help?Do you have a question about the Morris PROAG 16K PLUS and is the answer not in the manual?
Explains DANGER, WARNING, CAUTION symbols and their meaning for hazard identification.
Provides essential safety guidelines for operating and maintaining machinery safely.
Outlines critical safety procedures for operating the Bale Runner, including before, during, and after use.
Details safety precautions and regulations for transporting the Bale Runner on public roads and highways.
Covers essential safety practices and precautions to be followed when performing maintenance on the equipment.
Describes the importance and location of safety decals and signs on the machine.
Lists key performance metrics and physical attributes of the 16K PLUS Bale Runner, including capacity and weight.
Specifies the necessary horsepower and minimum tractor weight for optimal operation of the Bale Runner.
Details the required hydraulic pressure, flow, and control configurations for the Bale Runner system.
Provides the overall physical dimensions of the Bale Runner, including height, width, and length.
A step-by-step guide to ensure all critical checks are performed before operating the Bale Runner.
Provides a general overview of the operator's manual and the Bale Runner 16K PLUS.
Explains the terminology and diagrams used to describe the machine's functions and components.
Details how to connect the Bale Runner's hydraulic system to the tractor, including closed and open center systems.
Step-by-step instructions for correctly attaching and setting up the Bale Runner to the tractor for initial use.
Guides the operator through the initial power-on sequence and display prompts for the Bale Runner monitor.
Identifies and explains the function of various switches and buttons on the Bale Runner monitor control unit.
Describes how to adjust the monitor's display settings, including day/night mode and backlight brightness.
Explains the meaning of symbols displayed on the monitor, indicating hitch position and power slide status.
Details the functions available in the Manual Load screen for picking up bales individually.
Explains the automatic functions for loading and stacking bales, including sequences and button operations.
Provides detailed steps for using the automatic sequences to load and stack bales efficiently and safely.
Guides the user on how to set bale configurations and adjust counts for accurate loading and stacking.
Outlines the navigation structure for accessing different menus on the Bale Runner monitor.
Describes how to customize machine performance settings through various adjustment parameters.
Emphasizes critical safety precautions to be observed during all maintenance procedures.
Lists essential daily checks and tasks to ensure the Bale Runner remains in good working order.
Identifies all grease points and specifies the recommended lubricants for maintenance.
Details the procedures for maintaining the air brake system, including checks and adjustments.
Provides instructions for properly adjusting and maintaining the wheel bearings on the Bale Runner.
Offers basic guidelines for maintaining and troubleshooting the electrical systems of the Bale Runner.
Outlines procedures for preparing the Bale Runner for long-term storage at the end of the season.
Details the maintenance requirements and torque specifications for the trailer suspension components.
Provides instructions for properly storing the Bale Runner to ensure longevity and protect it from damage.
Details the steps for protecting chrome-plated cylinder shafts from corrosion during storage.
Outlines procedures for preparing the Bale Runner for use after a period of storage.
Highlights safety precautions to be taken when diagnosing and resolving issues with the Bale Runner.
Explains the function of the control system and its components, including the monitor and control box.
Offers guidance on diagnosing common problems related to the various sensors used in the Bale Runner's control system.
Details common causes and troubleshooting steps for ferrous metal sensors, including gap and debris issues.
Explains the machine's crash avoidance system and how sensor states determine movement permissions.
Provides detailed diagrams of the electrical harness connections for troubleshooting the control system.
A quick reference table listing common problems, their causes, and suggested corrections for the Bale Runner.
Lists and illustrates all parts associated with the main structural frame of the Bale Runner.
Details all components related to the hitch assembly, including pins, clamps, and cylinders.
Provides a schematic and parts list for the entire hydraulic system, showing hose and fitting connections.
Lists specifications and part numbers for various hydraulic cylinders used on the Bale Runner.
Details the components and wiring of the main electrical control system.
Provides diagrams and torque specifications for the trailer suspension components.
Lists parts and shows a diagram for the machine's air brake system.
General| Brand | Morris |
|---|---|
| Model | PROAG 16K PLUS |
| Category | Farm Equipment |
| Language | English |
To Next Page
