Operation
16K PLUS October 2019 5-51
Menu Screens - Continued
Measure Menu - Continued
Module Diagnostics
This menu provides a quick reference to how the display
screen and control unit on the machine are functioning.
• Status Display Screen: MD3 OK indicates the
monitor in the cab is working properly.
• + Bat: MD3 Indicates the voltage the monitor is
receiving from the battery.
• Signal Voltage: MD3 Indicates the voltage being
sent to power the joystick.
• Temp: MD3 Indicates the temperature (in Centigrade)
of the monitor.
• Status Computer: XA2 OK indicates the
COMPUTERcontroller on the 16k PLUS is working
properly.
• Address: XA2 Indicates the COMPUTERaddress
of the controller on the 16k PLUS.
• + Bat: XA2 Indicates the voltage the
COMPUTERcontroller is receiving from the battery.
• Signal Voltage: XA2 Indicates the voltage being sent
to power the sensors on the 16k PLUS.
• Temp: XA2 Indicates the temperature (in Centigrade)
of the COMPUTERcontroller.
To Next Page
Loading...
