Checklist
16K PLUS October 2019 3-3
Please read the Operator’s Manual carefully and
become a “SAFE” operator.
Adopt a good lubrication and maintenance program.
OWNER REFERENCE
Model:
Serial No:
Dealer:
To w n : State:
Phone:
OWNER/OPERATOR:
Date:
Pre-Operation Checklist
TAKE SAFETY SERIOUSLY.
DO NOT TAKE
NEEDLESS CHANCES!!
Before operating Bale Runner check the following items:
Pre-Operation Check
Lug nuts - Check that all lug nuts are present
and torqued to the appropriate specification.
Pin retaining bolts - Check for any missing or
loose bolts or pins, replace or tighten as necessary.
Hydraulic hoses - Inspect all hydraulic hoses and
replace any worn hoses. Remember: Use a piece
of cardboard or wood to look for leaks, replace
leaky hoses.
Jack - Check that the jack has been raised to its
hightest position and that the extension leg has
been fully retracted.
Hitch Safety Pin - If traveling, check that the Hitch
Safety Pin is securely in place. If gathering or
stacking, check that the Hitch Safety Pin has been
removed.
Warning Light - Check that the Warning Light
functions properly.
Lighting - Make sure the lighting is hooked up and
functioning properly.
Tire Pressure - Check tire pressure to make sure
it is within the specified range given on page 3 in
the Machine Specifications section.
Hitch Connection - Check the bolt system that
connects the stacker to the tractor drawbar. A loose
connection will wear faster and possibly uncouple.
Breakaway Device - Make sure the hitch safety
chain is connected.
Brakes - Check to see that the brake system is
hooked up and functioning properly if so equipped.
To Next Page
Loading...
