Morris PROAG 16K PLUS - Pre-Operation Checklist

Operation
16K PLUS October 2019 5-11
Pre-Operation Checklist
Before operating Bale Runner check the following items:
Pre-Operation Check

Lug nuts Check that all lug nuts are present and torqued to the appropriate torque rating.

Pin retaining bolts Check for any missing or loose bolts or pins, replace or tighten as necessary.

Hydraulic hoses Inspect all hydraulic hoses and replace any worn hoses. Remember: Use a piece
of cardboard or wood to look for leaks, replace leaky hoses.

Hitch Jack Check that the hitch jack has been raised to its hightest postion and that the extension
leg has been fully retracted.

Warning Light Check that the Warning Light functions properly.

Hitch Safety Pin If traveling, check that the hitch safety pin is securely in place.
If gathering or stacking, check that the hitch safety pin has been removed.

Tire Pressure Check tire pressure to make sure it is within the specied range given in the “Machine
Specications” Section 2.

Hitch Connection Check the bolt system that connects the stacker to the tractor drawbar. A loose
connection will wear faster and possibly uncouple.

Breakaway Device Make sure the hitch safety chain is connected.

Lighting Make sure the lighting is hooked up and functioning properly.

Brakes Check to see that the brake system is hooked up and functioning properly if so
equipped.