EasyManua.ls Logo

Morris PROAG 16K PLUS - Stair-Stepping Bales

Morris PROAG 16K PLUS
190 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
5-18 October 2019 16K PLUS
Gathering Bales - Continued
Stair-Stepping Bales
Some amount of “stair-step” is recommended to help
keep the top bale secure while the load is being pushed
to the back of the stacker.
After retrieving the rst bale, leave the loader slightly
raised while picking the second bale.
6 to 12 inches is usually all that is required.
To x the amount of stair-step after picking up two bales
in the alignment arms,
Raise the loader a few inches
Open the alignment arms to release the second bale.
The bale will slide to the ground.
Squeeze the alignment arms and raise the loader.
Note: Keep alignment arms on the rst bale closed
until ready to pick the second bale.
Stair-stepping ½ Ton Bales

Table of Contents

Related product manuals