Storage
7-2 October 2019 16K PLUS
Preparing for Storage
• To insure longer life and satisfactory operation,
store the implement in a shed.
• If building storage is impossible, store away from
areas of main activity on level, rm, dry ground.
• Lock Hitch in the “in-line” position with Hitch Safety
Pin.
• Set Loader on the Hitch.
• Relieve pressure in lines to prevent “thermal” lock.
• Clean machine thoroughly.
• Inspect all parts for wear or damage.
• Avoid delays - if parts are required, order at the end
of the season.
• Lubricate grease ttings. (Refer to Maintenance
Section).
• Tighten all bolts to proper specications (Refer to
Maintenance Section).
• For a safer storage, lower the implement into eld
position and release the hydraulic pressure.
• Level implement using hitch jack and block up.
• Relieve pressure from hydraulic system.
• Raise frames, block up and relieve weight from the
tires.
• Cover tires with canvas to protect them from the
elements when stored outside.
• Coat exposed cylinder shafts (Refer to Cylinder
Shaft Protection).
• Touch up any scratches or aking paint.
Note: Direct sunlight will cause tires and hoses to
deteriorate more quickly.
Warning
Do not allow children to play
on or around the machine.
Caution
Keep livestock away from machine so they will
not injure themselves or damage the machine.
To Next Page
Loading...
